Where Can I Buy Compatible Philips EPIQ CVX Probes?

Akicare now provides one-stop total solution for ultrasound probes:

compatible ultrasound probes,original ultrasound probes,ultrasoundprobe repair,biopsy guide for probes.

Here is what we can provide for you as follows:

Supply New Compatible Ultrasound Probes :

Compatible with GE, PHILIPS, SIEMENS, ESAOTE, MEDISON, MINDRAY, ALOKA, HITACHI, SHIMADZU, TOSHIBA, UTRASNOIX, SONOSITE, FUKUDA, CHISON, SIUI, EDAN, EMPROR, SONOSCAPE, Landwind, Kaixin, etc

Supply Used or New Original Ultrasound Probes:

GE,Philips,Siemens,Medison,Esaote,Sonosite,Toshiba,Aloka,Hitachi,Mindray,Sonoscape in Stock(Mostly are in good condition,even new).

Ultrasound Probe Repair/Replacement Service :

For Defective Original 2/3/4D Probes Of Strain Relief ,Membrane , Cables,Crystal,Lens,Connectors ,etc

Supply Biopsy Guides for Original ultrasound probes :

GE, PHILIPS, SIEMENS, SUMSUNG, ESAOTE, ALOKA, HITACHI, TOSHIBA, MINDRAY, SONOSITE, SONOSCAPE, ZONARE,etc

If you are looking to purchase a biopsy probe, but are not sure where to buy one, look no further. In this article, we’ll compare the Epq 7C and iE33 probes and discuss their features and safety precautions. We’ll also discuss the cost. So which one is best? Read on to discover which one is right for you. And if you’re still not sure, check out our comparison chart to see which ones have the best prices and features.

Epq 7C vs iE33

When comparing the Epiq 7C and iE33, you’ll see that the former is more advanced, and offers a mobile, easy-to-use workflow. The latter, meanwhile, is an advanced transducer with an industry-leading imaging system. Although the iE33 is no longer in production and is only available on the used market, the Aplio i900 comes close to it. Its combination of high-end image quality with an intuitive design enables clinicians to view patient data with unprecedented clarity.Philips EPIQ CVX Probes
Both ultrasound systems utilize the same transducer, but the iE33 offers a few features that the Epiq 7C doesn’t. The iE33 has a few features that are useful for diagnostic purposes, including xMATRIX live 4D imaging technology. The Epiq 7 uses a Philips X7-2t matrix transesophageal cardiac transducer and provides live 4D images of the heart. The Epiq 7 has a similar capability, but it also adds the PureWave probe technology.
If you are considering purchasing a probe from Philips, make sure that it is compatible with the iE33 transducer you are planning to use. The EPIQ 7 User Manual includes information on cleaning solutions and disinfectants that are compatible with the iE33 probe. Make sure you read the manual carefully and choose the one that works best for your situation.Philips EPIQ CVX Probes
The EPIQ 7 includes QLAB Advanced Quantification Software, PercuNav Image Fusion, connectivity capabilities, and a biopsy guide. These licensed options can only be purchased from a Philips representative and installed by a Philips field service engineer. You can also choose to create a custom procedure from the Procedure menu. You can then start the exam. If the procedure has been completed successfully, you’ll receive the desired data.

Safety precautions

Using a compatible Philips EPIQ CVX probe with an approved biopsy guide requires special precautions to prevent potential interference. Typically, medical devices emit a high level of electromagnetic interference (EMC), which can interfere with the accuracy of patient information. To ensure that your device does not cause electromagnetic interference, refer to the manufacturer’s manual, or contact Philips support for assistance. Similarly, you should avoid using any other imaging equipment with this probe, as it could result in unnecessary risks to the patient.
The EPIQ 7 User Manual lists important safety procedures, emergency procedures, and warnings. Failure to follow these instructions can cause personal injury or worse. The EPIQ 7 is compatible with only Philips products. Always read the user manual before you start operating the device. You can use it only for the intended purposes. Do not use it with incompatible products or equipment. However, if you are unsure about its compatibility with your device, consult an expert in the field.
Proper cleaning is essential to prevent contamination of the transducer. Cleaning the transducer with any liquid may result in permanent damage. Follow the cleaning instructions in the “Transducer Care” section of the user manual. Do not attempt to make any modifications or adjustments to your system unless instructed by Philips. Moreover, you must follow all applicable laws, regulations, and best engineering practices.
The EPIQ 7 User Manual also contains information on precautions for ESD and the electromagnetic environment. The manual also includes instructions on the proper handling of the transducer, including removing it from the patient and unplugging it whenever the device is not being used. While operating the EPIQ 7 ultrasound probe, you should unplug the device when not in use and remove the transducer before defibrillation.

Features

The EPIQ 7 includes a number of advanced features, including connectivity and QLAB Advanced Quantification Software. Other features include a VHS/S-VHS video input and microphone input, and a DVI video output receptacle. The user can customize the probe by selecting a custom procedure on the Procedure menu. To begin the exam, a physician must enter the patient’s data into the Patient Data form and then press the Start button.
The EPIQ CVX device also has a built-in EchoNavigator for enhanced image quality in the cath lab. The system’s Live 3D cropping and MPR alignment tools help minimize the risk of selecting the wrong device during the intervention. 3D workflow tools make it easier for clinicians to make decisions on where to place a patient for further investigation. The Epiq CVxi also supports Fluoroscopy, allowing doctors to integrate ultrasound images with fluoroscopy.
Another feature is the DVD drive. The DVD drive is located on the right side of the control module. It’s used to write setup and log data. The EPIQ 7 also has a USB connector. It’s recommended to use USB flash memory devices or hard disk drives to store data and logs. You can also use an external hard disk or DVD recorder. All of these features make it easier to analyze data with compatible EPIQ probes.
Lastly, there are three distinct regions on the Imaging Display. The Control Panel has buttons and knobs for selecting imaging modes, reviewing images and measurements, and accessing the Philips SupportConnect. These controls are easily accessible and intuitive to use. The EPIQ 7 also has a retractable keyboard that allows you to type comments, patient data, and text annotations to the images. A touch screen control panel and a soft key knob are other useful features.

Cost

Philips recently introduced the EPIQ CVx cardiovascular ultrasound system, based on its existing Epiq platform. The system is aimed at maximizing diagnostic confidence and streamlining the workflow of clinicians. It reduces the number of repeat scans, and Philips claims that 95 percent of cardiologists found it to be easier to use. This probe is especially suited for use in the interventional lab. Both Epiq CVx and EPIQ CVxi have received 510(k) clearance from the FDA.
The EPIQ CVX system is a dedicated cardiac ultrasound solution that delivers significant advancements in functionality. Its capabilities include higher processing power, exceptional imaging, improved exam efficiencies, and proven quantification capabilities. It can produce high-quality images of the heart and small organs. The system also features advanced technologies for improving quality, resolution, and detail of images. The EPIQ CVx also features a touch screen user interface and OLED display.
The cost of a compatible EPIQ CVX probe varies, but is well worth it. The XL14-3 probe is compatible with Philips Affiniti 70 and Epiq 7. It can help doctors determine plaque buildup by imaging arterial and vascular anatomy. With its two-plane imaging software, the xMATRIX probe can evaluate plaque buildup. Besides imaging, the device offers a variety of advanced quantification software options.
In addition to its connectivity capabilities, the EPIQ 7 system is portable. It is resistant to significant shock, though over-shocking may cause system failure. After moving it, make sure to reconnect the receptacles to avoid damaging the device. The system can run on batteries, but the battery must be removed prior to scanning. The batteries are meant for quick startup and easy movement. They cannot be used to perform imaging.

Compatibility

When you’re looking for a compatible biopsy guide for your Philips EPIQ CVX probe, you’ll want to make sure you’re buying a guide that is a direct fit for your device. In order to make sure your guide is compatible with your system, you can contact a Philips representative to confirm compatibility. Then, connect the biopsy guide to your transducer. Then, attach the biopsy guide to the probe and follow the instructions to the letter.
The EPIQ CVx cardiovascular ultrasound system is a powerful tool that is built upon the Epiq platform. Its aim is to improve diagnostic confidence and ease workflow for clinicians, while also reducing the need for repeat scans. Philips claims that over 95 percent of cardiologists who tested the new system reported increased image quality. There’s also the Epiq CVxi, a specialized interventional ultrasound probe designed specifically for the interventional lab. Both the system and the probe are CE marked and have received 510(k) clearance from the FDA.
For proper use, you should read the User Manual of the Philips EPIQ CVX. The manual also includes important information regarding safety and emergency procedures. Failure to adhere to these guidelines could result in personal injury or worse. It’s important to buy a probe that is compatible with the model you have, as incompatible products can cause interference. The Philips EPIQ 7 User Manual has safety and installation instructions. It’s also worth noting that the system has an isolated power outlet and isolation transformer. These devices should be used in an isolated area, as they’re not meant to be placed near communications equipment.
The EPIQ 7 has a swivel control module with a trackball for swiveling the control panel. The user manual also includes a retractable keyboard, so you can enter patient data, text annotations, or measurements in the software. You’ll also find a manual for the probe’s settings in the user manual, which can be accessed from Philips SupportConnect.

Send Me