Where Can I Buy Compatible philips EPIQ 7c probe.

Akicare now provides one-stop total solution for ultrasound probes:

compatible ultrasound probes,original ultrasound probes,ultrasoundprobe repair,biopsy guide for probes.

Here is what we can provide for you as follows:

Supply New Compatible Ultrasound Probes :


Supply Used or New Original Ultrasound Probes:

GE,Philips,Siemens,Medison,Esaote,Sonosite,Toshiba,Aloka,Hitachi,Mindray,Sonoscape in Stock(Mostly are in good condition,even new).

Ultrasound Probe Repair/Replacement Service :

For Defective Original 2/3/4D Probes Of Strain Relief ,Membrane , Cables,Crystal,Lens,Connectors ,etc

Supply Biopsy Guides for Original ultrasound probes :


Before purchasing a new biopsy probe, learn about the Philips EPIQ 7c. Learn more about its nSIGHT imaging technology and xMATRIX Array transducer. You’ll also learn about its Type CF classification and biopsy guideline. Also, find out how to properly attach the biopsy guide. Once you’ve done that, you’re ready to place your new biopsy probe in the water bath.

xMATRIX Array transducer technology

The Epiq 7C ultrasound scanner features an innovative shared-service architecture that introduces nSIGHT imaging architecture. This processing and beamforming technology allows Philips ultrasound systems to achieve unparalleled performance. This new feature improves contrast, temporal resolution, and spatial resolution. Compatible with compatible Philips EPIQ 7c probe, this system runs premium xMATRIX ultrasound transducers. These probes have been engineered to provide improved imaging in 2D, 3D, and 4D. The EPIQ 7c supports MicroCPA, ShearWaray, and PureWave transducers.
This device is available in countries and regions that have received the appropriate certifications. The transducer is a linear array designed for mid-to-high-frequency superficial imaging and high-resolution intraoperative vascular applications. Its linear array and xMATRIX Array transducer technology have earned the company multiple awards and are endorsed by the American College of Radiology (ACC).
To avoid interference from other electronic devices, it is vital to maintain the appropriate electrical power. Philips EPIQ 7C has a battery backup for emergencies. The user manual explains the EPIQ 7’s safety features and how to use it safely. The EPIQ 7U is a very powerful ultrasound scanner, but it can also be dangerous if used improperly. Despite the numerous safety features of this ultrasound scanner, a faulty probe can cause serious damage to the patient.
Once you have set up your EPIQ 7U, you should learn about the deflection limits for the S7-3T Tee Tip. By using proper deflection limits, you can minimize the risk of folding over the tip. The control knobs on the S7-3T are marked with icons in the upper or lower part of the display. The EPIQ 7U user manual includes detailed information on how to use the TEE.

nSIGHT imaging technology

The Philips Epiq 7C ultrasound machine is the latest evolution of the popular xMATRIX system. This innovative new architecture provides optimal resolution and enhanced image quality for cardiologists and physicians. The nSIGHT imaging architecture combines a new precision beamformer with powerful parallel processing to produce images with optimal resolution for every pixel. This advanced technology improves the overall experience of using the ultrasound machine, while ensuring optimal image quality and clinical performance.
The unique architecture of the EPIQ 7C transforms the conventional ultrasound system from passive to adaptive. With advanced organ modeling, image slicing, and proven quantification, AIUS delivers a higher level of clinical information. The integrated xMATRIX ultrasound transducer delivers all the modes in a single transducer, and the advanced Q-App features provide easy-to-use quantitative tools.
In addition to the Epiq 7c, the company also offers the xMatrix and Purewave ultrasound probes. These machines are lightweight and compact and offer superior ergonomics and workflow. All Epiq ultrasound machines are equipped with the same touchscreen monitor. The new xMatrix 7c probe is compatible with the EPIQ 7c ultrasound machine. Its high-resolution imaging capabilities help doctors diagnose and manage more complicated conditions in less time.

Type CF classification

There are two types of classification for medical ultrasound probes. Type CF is more stringent than Type BF. It generally applies to devices that have direct, medium, or long-term contact with a patient. Type B is less stringent, referring to the applied part of the probe, which is non-conductive and can be connected to the earth. The classification of Type BF and CF is set forth in IEC 60601-2-XX.
EMC is another concern for ultrasound devices, including medical equipment. EMC standards describe how to test for emitted and received electromagnetic interference. Philips ultrasound systems do not generate interference based on referenced standards. However, it is the physician’s responsibility to determine whether the tracking is accurate. When used in an environment known to cause electromagnetic interference, it can cause inaccurate information and personal injury.
If you are uncertain of whether the probe is compatible with your particular scanner, you can refer to the User Manual. You can find this information on pages 165 and 166 of the EPIQ 7c. Also, the user manual lists the different types of fuses. A CF-compatible probe should have one of the two types of fuses. You can also find the Type CF classification of compatible philips EPIQ 7c probe overseas.
The User Manual for the EPIQ 7c scanner has several adjustments for the monitor. In addition to adjusting the monitor brightness, contrast, and focus depth, the manual provides information on image processing and dynamic range. The manual recommends that you optimize your receiver controls before outputting images. The manual also includes information on how to set up the probe to work properly in a variety of imaging applications.

Biopsy guideline

To use the EPIQ 7c in conjunction with a biopsy guide, make sure that you are using the Philips transducer. The guideline shows the expected needle path, but it is up to you to verify the actual position. If the guide does not follow the expected path, you can contact a Philips representative to find out more about its compatibility. If you are using the EPIQ 7c with another probe, you should follow the procedure described in the EPIQ 7 User Manual.
For compatibility, make sure the EPIQ 7c is equipped with a power outlet that is isolated from the surrounding area. A medical-grade isolation transformer is also recommended. This will help protect the EPIQ 7c from any harmful electromagnetic interference or EMI. The EPIQ 7c’s user manual outlines the features of the probe’s software and hardware. It offers various options for printing DICOM images, waveforms, local reports, wireless DICOM transfer, and clinical/analysis applications. It also has advanced quantification software.
The EPIQ 7c’s user manual includes detailed instructions on the use of the biopsy instrument. You can find a full set of guidelines on page 168. Alternatively, consult your user manual for specific instructions. The EPIQ 7c User Manual is available for download here. It is an indispensable tool for a thriving laboratory. It is an essential piece of equipment for the entire team.

Cleaning and maintaining

In addition to cleaning the system, you must clean the transducer as well. If not, you may damage it permanently. To clean the transducer, follow the guidelines given under the “Transducer Care” section. You should also avoid introducing water or any other liquid into the transducer’s connectors. If you suspect that a problem is developing, contact a Philips representative or follow the manufacturer’s instructions.
Always read the User Manual and follow safety procedures. It contains important information about the system’s parts and functions. You should also learn how to troubleshoot common problems. The user manual also gives details on how to properly clean and maintain the system. Using the EPIQ 7 for other purposes can cause damage or even injury. For this reason, it is important that you read it carefully. You can also refer to the product’s manual for any instructions or tips that are specific to its usage.

Adding licensed options

The Philips EPIQ 7c has some advanced features that are essential for a successful imaging procedure. These include PercuNav Image Fusion, Connectivity, and QLAB Advanced Quantification Software. Adding licensed options requires purchasing a license from a Philips representative and installing them yourself or having a field service engineer do so. In this article, you’ll learn how to add licensed options to your compatible EPIQ 7c probe.
In addition to the EPIQ 7c’s built-in imaging capabilities, the probe supports a wide range of clinical applications. For example, you can print out your DICOM waveforms, images, and local reports. Wireless DICOM transfer is also supported. There are also advanced quantification software options that can be downloaded from the Philips website. If you’re considering purchasing a compatible EPIQ 7c ultrasound probe, it’s important to understand what options are available.
You can also add licensed options to your compatible EPIQ 7c probe to enhance its features. Philips products are compliant with national and international standards. You can request compliance information from a Philips representative or manufacturer to ensure that the device meets local regulations. It’s always best to consult a professional in electromagnetic safety before purchasing an EPIQ 7c probe. It’s vital to understand the limitations of your EPIQ 7c probe so that you can make the most informed decision.

Send Me