Where Can I Buy Compatible Siemens Sonoline Adara Ultrasound Probes?

Akicare now provides one-stop total solution for ultrasound probes:

compatible ultrasound probes,original ultrasound probes,ultrasoundprobe repair,biopsy guide for probes.

Here is what we can provide for you as follows:

Supply New Compatible Ultrasound Probes :


Supply Used or New Original Ultrasound Probes:

GE,Philips,Siemens,Medison,Esaote,Sonosite,Toshiba,Aloka,Hitachi,Mindray,Sonoscape in Stock(Mostly are in good condition,even new).

Ultrasound Probe Repair/Replacement Service :

For Defective Original 2/3/4D Probes Of Strain Relief ,Membrane , Cables,Crystal,Lens,Connectors ,etc

Supply Biopsy Guides for Original ultrasound probes :


Are you looking for the right replacement for your Siemens Sonoline Adara ultrasound probe? Here are some tips that can help you. First, be sure to know which ultrasound probe is compatible with your machine. After that, you need to store the unused one safely. After storing the probe, you need to check whether it has been damaged. If so, you can replace it by following the instructions that come with it.Sonoline Adara Ultrasound Probes

Purchase of siemens sonoline adara probe

If you are considering the purchase of Siemens sonoline adara ultrasound probe, you must take certain steps before using it. These steps include following statutory regulations, ensuring that the equipment is serviced and repaired by a qualified Siemens representative, and observing the warranty period. The equipment should be inspected and serviced by Siemens Authorized Care operators at least every 12 months or more frequently in exceptional conditions. If the machine is out of warranty, Siemens may refuse responsibility for repairs and recommends a replacement.
The Siemens sonoline adara ultrasound machine is sold with two probes and a printer. The probes are in excellent working condition. The Siemens service department can answer any questions you have and assist you with any problems. However, if you notice that the probe does not work properly, contact Siemens for assistance. You can also contact the Siemens service department to report the problem. The Siemens service representative will assist you and guide you through the process.
The SONOLINE G20 ultrasound system is a next-generation, all-digital imaging system that provides exceptional image quality. Advanced imaging processing and transducer technology are the foundation of this ultrasound machine. The software supports 2D-mode imaging. The SONOLINE G20 ultrasound system also comes with an integrated workstation, the DIMAQ-IP. The system is compatible with a Windows(r)-based computer. The SONOLINE G20 ultrasound system comes with a CD-R/W drive for digital imaging and data storage. It can be integrated into a network environment.
The transducer should be kept in a protective case at all times. It must not be dropped, knocked against something sharp, or otherwise jarred. Cleaning the transducer should be done carefully and thoroughly. Attempting to clean the transducer with improper methods may result in electrical shock and damage to the transducer. To avoid this, Siemens recommends that you follow the instructions on the disinfectant’s label and use only the recommended cleaning agents and solutions.

Storage of unused ultrasound probes

Store unused Siemens Sonoline Adara ultrasound devices carefully and in their original packaging to avoid damage to the probe. Never remove the clamp control housing from the probe, as this puts unnecessary stress on the cord and strain relief. Store unused ultrasound probes in a dry, cool environment. It is also a good idea to place them in a case or box to keep them safe from dust. Be sure to inspect them before use and avoid submerging them in cleaning solutions for an extended period of time.
The SONOLINE G20 ultrasound system offers excellent image quality and is portable, with user-matched ergonomics and workflow advances. Its superior imaging quality is further enhanced by its advanced capabilities and Siemens’ legendary reliability. Its powerful and versatile imaging capabilities deliver superior patient throughput and efficiency. It is the ideal choice for busy practices because of its affordability and high mobility. In addition to its high-end imaging capabilities, the SONOLINE Adara ultrasound system features panoramic image display.

Damaged ultrasound probes

There are two main types of damaged Siemens Sonoline Adara ultrasound probes: those that have dropped or are damaged at the connector. These are called ‘dropouts’ and occur when the ultrasound probe’s internal wires are frayed or broken. This type of damage usually requires a professional repair. If you’ve found a damaged probe, it is best to get it fixed as quickly as possible. Otherwise, you may risk a higher repair cost and the possibility of a system shutdown.
Another type of damage is caused by rough handling. Ultrasound transducers should be handled with care, so you may wish to wrap them in a protective bag or attach safety wires. You should also avoid rubbing the probe’s lens with disinfectant fluids, which can dry out the probe’s lens. Each probe cable has 128-320 tiny wires that connect to a crystal. Any rough handling can result in signal loss, so you should never rough handle an ultrasound probe. Remember, your health is at risk. It’s important to get it fixed as soon as possible to avoid any cross-contamination.
Another common problem is strain relief issues. These happen at the connector and the transducer connector. While strain relief problems aren’t a huge problem, they do affect image quality. Damage to the wires of the cable can cause the image to drop or even be lost entirely. So, if you’re experiencing a loss of image quality, consider getting it repaired. The cost of repair may be cheaper than replacing the entire ultrasound.

Send Me