INNOFINE JSM-200 Reusable Biopsy Needle Guide for Fujifilm UST-9128 / UST-978-3.5 / UST-9103-5 +1 — Replacement

If the INNOFINE JSM-200 Reusable Biopsy Needle Guide for Fujifilm UST-9128 / UST-978-3.5 / UST-9103-5 +1 on your probe is damaged, do not attempt to repair it: guides are precision accessories whose safety depends on exact geometry. This record helps you identify the matching replacement and confirm compatibility.

Catalogue name	INNOFINE JSM-200 Reusable Biopsy Needle Guide for Fujifilm UST-9128 / UST-978-3.5 / UST-9103-5 +1
Supplier	INNOFINE
Supplier reference	JSM-200
Guide type	Reusable Biopsy Needle Guide
Compatible probe references	Fujifilm: UST-9128, UST-978-3.5, UST-9103-5, UST-9121-3.5
Source record	INNOFINE product record

Why biopsy guides are replaced rather than repaired

Unlike the probe itself – where lenses, cables and connectors are routinely rebuilt – a guide is a single precision part. Once its bracket or channel is worn or cracked, tolerances are gone and the guide should be replaced, not patched.

This reference is listed for the following probe(s): Fujifilm: UST-9128, UST-978-3.5, UST-9103-5, UST-9121-3.5. Bracket geometry differs even between visually similar probes, so the pairing above is the starting point – not proof of fit.

When to replace the guide

• Visible cracks anywhere on the bracket or needle channel
• The guide no longer clicks or locks firmly onto the probe
• The needle channel is worn, scored or lets the needle wander
• Deformation after autoclaving or disinfection
• Discoloration combined with brittleness of the material

Confirm fit before ordering a replacement

• Photograph the probe’s full manufacturer and model label and send it with the request.
• Include photos of the existing guide or bracket and where it clips onto the probe.
• Quote the reference number printed on the guide or bracket, if legible.
• Specify the needle gauge range and whether you need a reusable or disposable configuration.
• Confirm sterilization or disinfection requirements in the request.

Similar probe names do not prove that two brackets are interchangeable – the attachment geometry and channel spec decide fit, so compatibility is confirmed against your exact probe label.

Ordering a replacement guide with a probe repair

If the probe itself is also damaged, mention it in the same request – a probe repair and a replacement guide can be assessed and quoted together, which is usually faster than handling them separately.

The illustration is representative and is not a photograph of this exact guide. This record does not claim OEM authorization or universal fit. Compatibility, included components, availability and commercial terms are confirmed in writing for the exact probe and guide reference.