INNOFINE DE-034 Disposable Biopsy Needle Guide for SonoScape BCC9-5 / BCC9-4 — Replacement

Biopsy guides like the INNOFINE DE-034 Disposable Biopsy Needle Guide for SonoScape BCC9-5 / BCC9-4 are replaced rather than repaired – the bracket geometry and needle channel must stay within tolerance, and a worn or damaged guide should come out of service. Use this page to confirm fit before ordering a replacement.

Catalogue name	INNOFINE DE-034 Disposable Biopsy Needle Guide for SonoScape BCC9-5 / BCC9-4
Guide supplier	INNOFINE
Supplier reference	DE-034
Guide type	Disposable Biopsy Needle Guide
Compatible probe references	SonoScape: BCC9-5, BCC9-4
Source record	Supplier product record

Why biopsy guides are replaced rather than repaired

Guides take repeated mounting, sterilization and needle passes. Wear accumulates in the attachment points and needle channel, and there is no economical way to re-machine a worn guide back into tolerance. Replacement is the standard practice.

This reference is listed for the following probe(s): SonoScape: BCC9-5, BCC9-4. Bracket geometry differs even between visually similar probes, so the pairing above is the starting point – not proof of fit.

When to replace the guide

• Any crack in the bracket or channel, however small
• The guide no longer clicks or locks firmly onto the probe
• The needle channel is worn, scored or lets the needle wander
• Warping or distortion after reprocessing
• Discoloration combined with brittleness of the material

Confirm fit before ordering a replacement

• Send a clear photograph of the complete probe manufacturer and model label.
• Photograph the current guide or bracket, including the attachment point on the probe.
• Quote the reference number printed on the guide or bracket, if legible.
• State the needle gauges you work with and whether reusable or disposable is required.
• Confirm sterilization or disinfection requirements in the request.

Similar probe names do not prove that two brackets are interchangeable – the attachment geometry and channel spec decide fit, so compatibility is confirmed against your exact probe label.

Ordering a replacement guide with a probe repair

Ordering a replacement guide alongside a probe repair? Include both in one request with the probe label photo – compatibility for the guide and repairability for the probe get confirmed in a single assessment.

The illustration is representative and is not a photograph of this exact guide. This record does not claim OEM authorization or universal fit. Compatibility, included components, availability and commercial terms are confirmed in writing for the exact probe and guide reference.