Leapmed 120055 Reusable Biopsy Needle Guide for GE 12L / LOGIQ3 / LOGIQ5 / LOGIQ7 / LOGIQ9 — Replacement

The Leapmed 120055 Reusable Biopsy Needle Guide for GE 12L / LOGIQ3 / LOGIQ5 / LOGIQ7 / LOGIQ9 is a positioning accessory, not a repairable device: when a guide is cracked, worn or no longer locks onto the probe, the correct action is replacement. This page helps you confirm the right replacement for your exact probe.

Catalogue name	Leapmed 120055 Reusable Biopsy Needle Guide for GE 12L / LOGIQ3 / LOGIQ5 / LOGIQ7 / LOGIQ9
Guide supplier	Leapmed
Supplier reference	120055
Guide type	Reusable Biopsy Needle Guide
Compatible probe references	GE: 12L, LOGIQ3, LOGIQ5, LOGIQ7, LOGIQ9
Source record	Supplier product record

Why biopsy guides are replaced rather than repaired

Guides take repeated mounting, sterilization and needle passes. Wear accumulates in the attachment points and needle channel, and there is no economical way to re-machine a worn guide back into tolerance. Replacement is the standard practice.

This reference is listed for the following probe(s): GE: 12L, LOGIQ3, LOGIQ5, LOGIQ7, LOGIQ9. Bracket geometry differs even between visually similar probes, so the pairing above is the starting point – not proof of fit.

When to replace the guide

• Any crack in the bracket or channel, however small
• The guide no longer clicks or locks firmly onto the probe
• The needle channel is worn, scored or lets the needle wander
• Deformation after autoclaving or disinfection
• Brittle, discolored material that flexes differently than new

Confirm fit before ordering a replacement

• Photograph the probe’s full manufacturer and model label and send it with the request.
• Photograph the current guide or bracket, including the attachment point on the probe.
• Quote the reference number printed on the guide or bracket, if legible.
• State the needle gauges you work with and whether reusable or disposable is required.
• Note your sterilization or disinfection workflow so the right configuration is offered.

Similar probe names do not prove that two brackets are interchangeable – the attachment geometry and channel spec decide fit, so compatibility is confirmed against your exact probe label.

Ordering a replacement guide with a probe repair

Ordering a replacement guide alongside a probe repair? Include both in one request with the probe label photo – compatibility for the guide and repairability for the probe get confirmed in a single assessment.

The illustration is representative and is not a photograph of this exact guide. This record does not claim OEM authorization or universal fit. Compatibility, included components, availability and commercial terms are confirmed in writing for the exact probe and guide reference.