If the Leapmed 10207602 Disposable Biopsy Needle Guide for Siemens EC10-5w; Medison E3-12A / NEV4-9ES / NER4-9ES +5 on your probe is damaged, do not attempt to repair it: guides are precision accessories whose safety depends on exact geometry. This record helps you identify the matching replacement and confirm compatibility.
| Catalogue name | Leapmed 10207602 Disposable Biopsy Needle Guide for Siemens EC10-5w; Medison E3-12A / NEV4-9ES / NER4-9ES +5 |
|---|---|
| Supplier | Leapmed |
| Supplier reference | 10207602, 10652102 |
| Guide type | Disposable Biopsy Needle Guide |
| Compatible probe references | Siemens: EC10-5w Medison: E3-12A, NEV4-9ES, NER4-9ES Alpinion: E3-10 BK Medical: 8819, E10C4, 9019 Carestream: E10C4 Philips: BP10-5ec, C9-4ec Aloka: UST-679 |
| Source record | Leapmed product record |
Why biopsy guides are replaced rather than repaired
Guides take repeated mounting, sterilization and needle passes. Wear accumulates in the attachment points and needle channel, and there is no economical way to re-machine a worn guide back into tolerance. Replacement is the standard practice.
This reference is listed for the following probe(s): Siemens: EC10-5w Medison: E3-12A, NEV4-9ES, NER4-9ES Alpinion: E3-10 BK Medical: 8819, E10C4, 9019 Carestream: E10C4 Philips: BP10-5ec, C9-4ec Aloka: UST-679. Bracket geometry differs even between visually similar probes, so the pairing above is the starting point – not proof of fit.
When to replace the guide
- Any crack in the bracket or channel, however small
- Loose or unreliable locking onto the probe
- A worn or scored channel that no longer tracks the needle cleanly
- Warping or distortion after reprocessing
- Brittle, discolored material that flexes differently than new
Confirm fit before ordering a replacement
- Send a clear photograph of the complete probe manufacturer and model label.
- Include photos of the existing guide or bracket and where it clips onto the probe.
- Quote the reference number printed on the guide or bracket, if legible.
- State the needle gauges you work with and whether reusable or disposable is required.
- Confirm sterilization or disinfection requirements in the request.
Similar probe names do not prove that two brackets are interchangeable – the attachment geometry and channel spec decide fit, so compatibility is confirmed against your exact probe label.
Ordering a replacement guide with a probe repair
Ordering a replacement guide alongside a probe repair? Include both in one request with the probe label photo – compatibility for the guide and repairability for the probe get confirmed in a single assessment.
The illustration is representative and is not a photograph of this exact guide. This record does not claim OEM authorization or universal fit. Compatibility, included components, availability and commercial terms are confirmed in writing for the exact probe and guide reference.
Reviews
There are no reviews yet.