Akicare THREE Support & Replacement

Fault diagnosis and repair options for the Akicare THREE: failure modes, self-checks and what an assessment needs.

Table of Contents

PRODUCT DETAILS

Supply Ability

Supply Ability5000 Unit/Units per Year

Packaging & Delivery

Packaging DetailsCommon Box
PortHongkong
Picture Example:Ultrasound Probes Akicare Ultrasound Probes Akicare

DESCRIPTION

A failing Akicare THREE does not always mean buying a new probe. Use the fault table below to match what you are seeing on screen to a likely cause, then check what a repair assessment would need.

Manufacturer Akicare
Model THREE

Common failure modes for the THREE

Match what you are seeing against the table below. The right-hand column reflects how faults of this kind typically assess – the actual verdict always depends on the individual probe.

What you see Likely cause Typically repairable?
Whole regions of the image blank across the array width Widespread element or acoustic stack failure Usually not economical
Outer cable sheath showing cracks, kinks or staining Surface jacket wear – the conductors inside are often still good Usually repairable
Pin damage or corrosion visible in the connector Mechanical damage from forcing or dropping the connector Usually repairable
Depth performance clearly below what this probe used to deliver Ageing elements or lens delamination reducing acoustic output Case by case
Cracked or dented housing A drop or knock; housings are routinely replaced or resealed Usually repairable
Intermittent signal that changes as the cable moves One or more conductors broken inside the cable bundle Case by case
Bubbles or lifting at the lens face The lens separating from the acoustic stack underneath Usually repairable

Check these before you ship the probe

  • Flex the cable gently along its length while imaging – intermittent dropout points to broken conductors.
  • Check the strain reliefs at both ends for splits, stiffness or separation from the cable.
  • Inspect the lens face under good light for cuts, bubbles, lifting edges or discoloration.
  • Examine the connector for bent or corroded pins, cracks and a working locking mechanism.
  • Run the system’s built-in probe test or element check if your console provides one.

Repair, exchange or replace — which applies to your THREE

For the THREE, think in terms of damage depth: surface and cable-level faults are usually repairable at a fraction of replacement cost; acoustic stack failures are evaluated case by case; extensive element loss generally means replacement. Send the symptoms and photos first – that determines the path before anything ships.

What we need to quote your THREE repair

  • A clear photo of the complete manufacturer and model label on the probe
  • A description of the fault: what you see on screen and when it started
  • The ultrasound system (console) the probe is used with
  • Screenshots or photos of the image problem, if the fault is visual
  • Photos of any physical damage – lens, housing, cable or connector

Images shown are representative and are not photographs of an individual unit. Nothing on this page claims OEM authorization or guarantees universal fit. Whether a specific THREE can be repaired, and on what terms, is confirmed in writing once the probe has been assessed.

Company Profile

Akicare now provides one-stop total solution for new ultrasound probes,ultrasound probe repair service and biopsy guide for ultrasound probes.We have exported our products to more than 120 countries all over the world.
Company Advantage
1.High quality.
2.Fast shipping.
3.Over Ten years old experience.
4.Covering most of ultrasound probe models.

Sample Room

Customer Feedbacks

Exhibition

Production Process

Packing & Shipping

FAQ

Q: What is the MOQ?

A: 1pc.

Q: How about your delivery time?

A: 1~15 days depends on your order quantity.

Q: What is your terms of delivery?

A: DHL,TNT, EMS,UPS,FedEx,also can use customer’s freight forwarder. 

Q: What is your terms of payment?

A: Western union, Alibaba Trade Assurance, T/T in advance. 

Q: Do you test all your goods before delivery? 

A: Yes, we have 100% tested our goods before delivery. 

Q: What is your Service & Return policy? 

A: If the probe is not compatible with your machine or there are any quality problem within 7 days after receiving the goods, please feel free to contact us. We will send a replacement probe or refund the payment to you.

Send Me