Ultrasound probe repair, verified before you ship.
Component-level transducer repair across 43 OEM brands — acoustic lens, array elements, micro-coax cable, 3D/4D motor assemblies, and TEE shafts. Send console fault photos first; if a probe is not economical to repair, we tell you not to ship it.
Request a Repair Assessment
Email or WhatsApp — one sentence or model number starts a written engineering check within one working day.
The Shenzhen repair floor — and the test report you receive
Not a trading broker. Every transducer is opened, rebuilt under magnification, and verified on real OEM ultrasound systems before dispatch. Below is our bench alongside an unedited customer test report excerpt (identity & pricing removed).



Issued 2 September 2025. Written test reports include incoming fault documentation, component action taken, and live console acoustic verification.


What are you seeing on the ultrasound screen?
Match the observed artifact or physical damage to its typical component root cause and bench repairability before requesting an assessment.
| Observed Console / Physical Symptom | Primary Root Cause | Bench Feasibility | What to Send First | Technical Guide |
|---|---|---|---|---|
| Dark vertical bands or element dropout | Dead piezoelectric crystals or fractured coaxial conductors | High when cable/localized; screened by photo if array-wide | Probe model + clear B-mode screen photo | Dropout diagnosis → |
| Bubbles, peeling, or air pocket on face | Acoustic lens delamination / chemical disinfectant swelling | Routine bench repair when caught before fluid enters array | Close-up of acoustic lens + model label | Lens delamination → |
| Image flickers or cuts out when flexed | Fatigued micro-coax shield or conductors inside strain relief | Routine cable harness & strain relief rebuild | Model + note of where flex triggers drop | Cable repair → |
| 3D/4D sweep freezes, clicks, or oil bubble | Sweep motor, drive belt, encoder, or dome acoustic seal | High — mechanical rebuild preserves intact 2D array | Model (e.g. RAB6-D) + dome photo / error code | 3D/4D volume repair → |
| Failed electrical leak test (TEE / endocavity) | Insertion tube pinhole, bending rubber tear, or seam breach | Stop clinical use immediately; sheath & seal restoration | Model + leak tester reading / bite mark photo | TEE probe repair → |
| Probe not recognized / bent ZIF pins | Connector pin damage, latch wear, or ID EEPROM fault | Routine connector & locking mechanism rebuild | Connector face photo + host console model | Connector repair → |
3,011 documented probe & biopsy guide references
Browse failure modes by transducer geometry or jump directly to your OEM brand hub. Biopsy needle guides are replaced new rather than repaired because worn bracket geometry cannot be verified back into needle-path tolerance.
By Transducer Type
Top OEM Brand Hubs
- GE HealthCare (Voluson, Logiq, Vivid)370 models
- Hitachi Aloka (Arietta, ProSound)254 models
- Mindray (DC, Resona, M-Series)205 models
- Philips (EPIQ, Affiniti, iE33, iU22)201 models
- Siemens Acuson (S2000, Sequoia, X300)195 models
- Canon / Toshiba (Aplio, Xario)191 models
- View all 43 OEM brands & specialized services →43 brands
How international probe repair works in practice
Clear division of responsibilities before anything leaves your hospital or service depot.
Your side (2 steps)
- 1. Pre-shipment check: Send the probe label photo, console model, and screen artifact image (cover any patient identifiers). Live video call available on request.
- 2. Inbound courier: Once we confirm repairability in writing, you book and pay inbound shipping to our Shenzhen lab.
Akicare’s side (4 commitments)
- 1. Bench quote after inspection: Final price is confirmed only after hands-on bench diagnostics — never guessed from a photo.
- 2. ~5–7 working days in-house: Repaired and validated on live OEM ultrasound systems; written test report issued on request.
- 3. Free return shipping & duties worldwide: We arrange return courier, prepay freight and import duties, and clear customs — including when a probe cannot be repaired.
- 4. 6–12 month written warranty: Confirmed with your quote; if the fault returns within warranty, we re-repair free of charge.
Working with clinics, biomeds, and dealers worldwide
Our own meeting and medical trade show photographs across Asia, Latin America, Europe, and the Middle East — no stock imagery.
Questions biomeds ask before shipping
Can a broken ultrasound probe be repaired?
Often yes. Acoustic lens delamination, housing cracks, cable/strain relief breaks, connector pin damage, and 3D/4D mechanical sweep failures are routine repairs. Widespread piezoelectric array failure is usually not economical — which we screen before you ship.
How do I know if my probe is worth repairing before paying freight?
Send the model label and a photo of the B-mode screen artifact (or request a quick video call). If the symptom indicates unrepairable array-wide crystal loss, we advise you not to ship.
Who pays for shipping and customs duties?
You arrange and pay inbound courier shipping to Shenzhen. Return shipping costs you nothing: Akicare arranges return delivery, prepays freight and import duties, and handles customs paperwork — including when the probe could not be repaired.
Do you claim OEM authorization?
No. Akicare is an independent component-level repair laboratory in Shenzhen. Brand names (GE, Philips, Mindray, Siemens, Canon/Toshiba, Hitachi Aloka, Samsung, etc.) are used solely to identify probe compatibility and repair scope.






